intanChip > 네스켓

intanChip

RHS Recording System

RHS Stim/Recording System

RHS Stim/Recording Controller

Features

Supports all Intan RHS headstages with sampling rates of 20, 25, or 30 kS/s.

All headstage channels can independently produce stimulation currents from ±10 nA to ±2.5 mA with ±7V compliance.

Biphasic or triphasic stimulation pulses are generated with timing resolution as fine as 33 μs.

Stimulation pulses are pre-configured in software and triggered by keypresses or digital inputs.

Independent ground isolation on each headstage port to reduce noise from ground loops.

Software supports in situ electrode impedance measurement.

Two analog input ports and two analog output ports with ±10V range.

Two digital input ports and two digital output ports.

Analog and digital inputs are recorded in sync with amplifier waveforms; may be used to trigger stimulation pulses or to control automated episodic recording sessions.

Optional I/O expander increases the number of auxiliary ports to 8 analog in, 8 analog out, 16 digital in, and 16 digital out.

May be mounted in standard 19" rack (1U) or operated from a bench top.

RHS 16-Channel Stim/Recording Headstages

Atlas Neuroengineering (16ch semi-chronic, chronic probes)
Doric Lenses (opto-electric cannulas)
MicroProbes (most array types)
NeuroNexus (CM16LP, OCM16LP, H16, HC16, OH16LP, DM16, MR_CM16, MR_H16, V16, OV16, VC16 and others)
Plexon (CON/16o25m-18P, CON/16m-V, and others)
Cambridge NeuroTech (ASSY-79 probes)

Technical Specs	Part #M4016 RHS 16ch
Headstage inputs	16 unipolar inputs, common reference, ground
Electrode connector	Omnetics A79041: 18 pins, 2 guide posts
Data cable connector	16-pin RHS Stim SPI cable connector; high-speed serial digital data
Size	24 mm x 13 mm
Mass	0.99 grams

RHS 32-Channel Stim/Recording Headstages

Technical Specs	Part #M4032 RHS 32ch
Headstage inputs	32 unipolar inputs, common reference, ground
Electrode connector	Omnetics A79025: 36 pins, 4 guide posts
Data cable connector	16-pin RHS Stim SPI cable connector; high-speed serial digital data
Size	24 mm x 15 mm
Mass	1.35 grams

RHS Stim SPI Interface Cables

The following RHS Stim SPI cables are available from Intan Technologies:
RHS 3-ft (0.9 m) Stim SPI cable (Part #M3203)
RHS 6-ft (1.8 m) Stim SPI cable (Part #M3206)

Technical Specs	Part #M4032 RHS 32ch
Connector type	Omnetics PZN-16 polarized nano
Connector size	5.7 mm x 4.3 mm x 2.0 mm
Color	Red
Cable diameter	24 mm x 15 mm
Cable mass	1.35 grams
Outer jacket material	3.4 mm
Maximum cable length (16ch headstage)	11.9 g/ft ,7.3 g/m
Maximum cable length (32ch headstage)	0.013" thermoplastic elastomer (TPE)
Maximum cable length (16ch headstage)	24 ft (7.2 m)
Maximum cable length (32ch headstage)	21 ft (6.3 m)

RHS Stim SPI Cable Adapter Board

The RHS Stim SPI cable adapter board (Part #M4430) connects to a Stim SPI cable and brings out all 16 power and data wires to 0.1" pitch solder holes for easy access. This board may be used to interface RHS Stim SPI cables with prototype devices. It may also be used to connect RHS Stim SPI signals to a commutator, as described in the application note, Adapting RHS Stim SPI cables to a commutator.

Tel

031-701-5502
E-mail

support@netsket.kr
Online Inquiry
견적요청